Coolers
Specifications
- Pull-out dual screens on each pump box allow for cleaning of screens without shutting down pumps.
- Individual float switches for each pump box eliminates potential pump damage due to clogged screens.
- Stainless steel shafting will not rust, as plated shafting can do over time.
- Stainless steel plumbing is much sturdier than PVC, and is less likely to be damaged.
- Modular design allows for adding length for future production requirements, or removing sections if moved to a slower line.
- Modular design allows for ease of shipping and installation.
- Dynamic infeed and outfeed eliminates the need to push the last few bottles in at the end of a run or a shift, or to pull the bottles out at the outfeed.
- All bolts and parts are to North American standards, and metric tools or replacements are not required.
- High air volume reduces water usage.
- 11 Ga Stainless steel modular construction, #4 exterior finish.
- 2 1/2" Minimum square stainless steel drive shafting.
- Heavy mattop belting.
- Air knife water blow off at outfeed.
- Stainless steel plumbing, including spray headers.
- Double screened pump boxes.
- Float level switches for each pump, and for general tank level.
- Access doors to tank for cleaning.
- Dynamic infeed and outfeed to eliminate deadplates.
- Minimum elevation is 44" +/- 2". Higher elevations as required.
- High volume exhaust blowers.
- Simple temperature control system.
- Air intake to draw in outside air.
- Stainless steel control panel.
- Local motor disconnects and lockouts for each motor.
Footprint
Larger View
Options
- Spare parts kit.
- Deadplate infeed/outfeed available.
- Non-standard items to meet a customers preference can be done on a case by case basis.
Warmers
Specifications
- Pull-out dual screens on each pump box allow for cleaning of screens without shutting down pumps.
- Individual float switches for each pump box eliminates potential pump damage due to clogged screens
- Stainless Steel shafting will not rust, as plated shafting can do over time.
- Stainless steel plumbing is much sturdier than PVC, and is less likely to be damaged.
- Modular design allows for adding length for future production requirements, or removing sections if moved to a slower line
- Modular design allows for ease of shipping and installation.
- Dynamic infeed and outfeed eliminates the need to push the last few bottles in at the end of a run or a shift, or to pull the bottles out at the outfeed
- All bolts and parts are to North American standards, and metric tools or replacements are not required.
- 11 Ga Stainless Steel modular construction, #4 exterior finish
- Heavy mattop belting.
- 2 1/2" Minimum square stainless steel drive shafting.
- Air knife water blow off at outfeed.
- Low volume exhaust blower used to prevent product damage from overheating in a stopped condition.
- Double screened pump boxes.
- Float level switches for each pump, and for general tank level.
- Access doors to tank for cleaning.
- Dynamic infeed and outfeed to eliminate deadplates.
- Minimum elevation is 44" +/- 2". Higher elevations as required.
- Steam/water heat exchanger heats water to desired temperature.
- Temperature of the tank is controlled through a steam regulator at the infeed of the heat exchanger.
- Eurodrive main belt drive with variable frequency drive to control speeds.
- Stainless steel control panel.
- Local motor disconnects and lockouts for each motor.
Footprint
Larger View
Options
- Spare parts kit.
- Deadplate infeed/outfeed available.
- Non-standard items to meet a customers preference can be done on a case by case basis.